Best Thermal Printer For Amazon FBA 2022

Thermal printer, a machine, that we can say, has become synonymous with Label printing. So, if you’re an FBA seller, you must have one.

But wait! Why thermal?

Because an inkjet model gives you smearing issues! And a laser model is just inconvenient. On top of that, Amazon would recommend using thermal device themselves.

You may find it simple but the benefits make it more valuable. It helps save you time, money, and energy, provides you with quality, durability, and higher productivity.

So, want the labels to have legible details and scannable barcodes? then scroll down to our list. We have found a few models that boast features required to be the best thermal printer for Amazon FBA.

Best Thermal Printer For Amazon FBA 2022
Best Thermal Printer For Amazon FBA

Comparison Chart For Top 5 Thermal Printers For Amazon FBA

IMAGE PRODUCT SPEED (LPM)MAX LABEL WIDTHSPECIALTYprice
ROLLO X1038594.16″Budget-friendly
MUNBYN MU-ITPP941-US594.3″Heavy-duty
Polono PL60714.65″Allows wider labels
iDPRT SP410714.25”Compatible with Windows, Mac, Linux
K Comer CX418824.3”Quickest

5 Best Thermal Printer For Amazon FBA Reviews

1. ROLLO X1038

If you’re looking for a budget-friendly option, then this X1038 by Rollo would be a great label printer for FBA. One big plus of the model is that it works with any kind of thermal labels thanks to thermal direct tech. There are no restrictions on buying any proprietary tags that could cost you a fortune. This makes X1038 more cost-effective.

Setting up the printer is very easy. You will get the required cables with the model to make it connect to your computer or laptop. It shouldn’t take over 10-12 minutes.

The print head is durable and would last up to 500,00 labels before telling you to get a replacement. And as for the speed, the device does a pretty good job. You can have 59 labels printed within a minute. Just know that the faster you go, the lighter the prints will be.

With 203 dpi resolutions, the details on the FBA box labels look quite sharp. In case, you want it to produce darker printouts, then it’s suggested that you decrease the speed and increase the density in Settings from Printer Preferences.

While the printer works great with 4×6, you can use labels of different widths of up to 4.16 inches by adjusting the tray.

Pros

  • Prints the labels pretty fast.
  • Details are crisp and easy to understand.
  • Compatible with labels measuring up to 4.16-inch wide.
  • Works with any kind of thermal label.
  • Setup is simple with cable.

Cons

  • Prints become slightly light due to quicker speed.

2. MUNBYN MU-ITPP941-US

This thermal printer would be a heavy-duty model for you. With a speed rate of 59 labels per minute, it would do the printing job pretty quickly. Not just that, the model tends to continuously spit up to 700 labels a day. After that, it pauses for 5 minutes so that it prevents getting overheated. This is an efficient feature to have for keeping the printer safe.

The thermal printer has resolutions standing at 203 dpi. It ensures sharp texts and detectable barcodes. In short, you would get high-quality prints on each 4×6-inch label.

Its tray would adjust the width from 1.57 to 4.3 inches. So, you can easily use shipping labels as well as FBA box labels.

Connecting the thermal printer to your Windows PC would take just 5 minutes. However, things are slightly challenging for Mac users. So, it would be better if you follow the instructions step by step. To make it work efficiently, we suggest that you download the driver from website, check up your mail, and update the computer as well.

This thermal printer is quite easy to use. It automatically detects the characteristics and size of your label. So, this is going to be a convenient one.

Pros

  • Detects the size and characteristics of tags automatically.
  • Delivers high-quality prints on FBA labeling.
  • Easy setup on Windows.
  • Adjustable between 1.57 to 4.3 inches.
  • Speed rate is very decent.

Cons

  • Setup on Mac is complicated.

3. Polono PL60

Clear-printing, just like the way you want. PL60 comes with 203 dpi resolutions, meaning all the words and barcodes would appear crisp and bold. Changing the settings would surely give you more premium quality, but the prints look fine without that as well.

One big plus of the thermal printer is its speed. It would provide you with 71 labels printed in just a minute. Plus, the print head is solid enough to last up to 160,000 standard labels for Amazing shipping.

It tends to be very user-friendly. The tray would easily allow for tags as wide as 4.65 inches. Adjusting the width is pretty simple just like using the device.

You would find it very simple to set up. Just download the driver, give yourself 2 minutes and it would easily be ready to use for printing. Although the printer would be compatible with both Windows and Mac, it wouldn’t work with Linux like it’s been advertised. If you want something for Linux, then you can consider this model by iDPRT.

Pros

  • The tray can be adjusted up to 4.65-inch width.
  • Prints are of high quality.
  • Takes just 2 minutes to set it up on Windows and Mac.
  • Tends to work super quickly.
  • Very easy to use.

Cons

  • Not compatible with Linux as advertised.

4. iDPRT SP410

This is a very quiet thermal printer you can have for Amazon FBA. Even with the fastest setting, it would do the work without making much noise.

Speaking of speed, SP410 tends to print at a speed rate of 71 labels per minute. Because it’s quick, you can use it for a big batch of FBA labeling. Plus, its print head promises to be long-lasting. You can have around 160,000 labels printed with this model.

The tray would adjust from 2 to 4.25 inches to accommodate labels of those ranges. Not just that, the device would adjust the position automatically and

With 203 dpi resolutions, the thermal printer ensures premium quality prints on your labels. However, some did have complained about the prints appearing faded. Don’t worry. It’s because of a default setting on your printer. Just go to ‘Printing Preferences’, then ‘Graphics’ and uncheck ‘Dithering’. This will sort out the issue and you would get bold and clear prints.

One good thing is that the printer is compatible with different operating systems. You can set it up on your Windows, Mac as well as Linux. All you need is to download the driver from their website and follow all the instructions. It would take 5 to 30 minutes depending on your OS. You may find it complicated at first but you would get it right eventually either by yourself or by someone expert.

Pros

  • Prints the FBA labels very fast.
  • Texts and barcodes are sharp and bold.
  • Adjustable from 2 to 4.25 inches.
  • Compatible with Windows, Mac, and Linux.
  • It prints very quietly.

Cons

  • Setup might be complicated.

5. K Comer CX418

Another very durable FBA label printer. K Comer Cx418 has resolutions of up to 203 dpi and delivers highly readable-quality printing on 4×6 labels. One big plus is that it would last up to 500,000 labels unless the lifespan of the print head ends. On top of that, you can make it work nonstop for over 12 hours, the device wouldn’t get overheated or damaged.

This thermal printer is very user-friendly. You can place the FBA labels ranging from 1.57 to 4.3-inch width and adjust one accordingly.

One noticeable factor is that it prints the tags very fast. Within a minute, it would spit around 82 labels for you. This would be especially efficient for the ones who have to deal with lots of tags to be printed.

You can easily set the thermal printer on your Windows or Mac if you follow the instructions carefully. It might be time-consuming but the process would be easy especially for the tech savvies.

The most annoying function is that the printer starts beeping continuously when it runs out of labels. However, you can make the beeping stop by either reloading the label or turning the printer off.

Pros

  • Produces lots of printed labels in a minute.
  • Would last around 500,000 pieces.
  • Print quality is legible and deep.
  • The tray can be adjusted from 1.57 to 4.3-inch wide.
  • Very user-friendly.

Cons

  • Beeps nonstop annoyingly when out of labels.

Thermal Printer For Amazon FBA Buying Guide

Resolutions

Resolutions of thermal printers range from 200 to 600 dpi.

Since the labels contain texts and barcodes and since they are of smaller sizes, the device doesn’t need to have the highest resolutions.

However, you get fine quality printing on 4×6 inches if the resolutions are at least 200 dpi. The higher you go, the better the quality will be. Also, the larger the labels, the higher the resolutions are required.

For instance, this can be a suitable Amazon FBA label printer by Rollo that has up to 203 dpi resolutions. The text and barcode prints on 4×6 labels look legible and clear.

Label Size

Typically, an FBA box label and shipping label should measure 4×6 inches but it can reach up to 6×8 inches. However, that depends on the box size you’re using.

Make sure the thermal printer can adjust it up to the width of your preferred label. It can mostly range from 1.57 inches to 4.65 inches.

One benefit of having wider adjustment is that you can use labels of different sizes and for different purposes.

In case you want a model that allows for wider labels, you can check out Polono PL60.

Lifespan Of Print Head

The durability of a print head matters when it comes to thermal printer use.

For startups and small businesses, you can consider having a thermal printer that would last more than 100,000 labels. The good news is that there are some models like ROLLO X1038 that can deliver 500,000 printed labels before you need a new one. 

The efficiency of a thermal printer depends on the number of printed labels it can produce on an average day. You get such details from the printer’s head specification.

Some printers can deliver 500 while some can do 10,000 printed labels per day depending on the model type. Just make a note of how many labels you would have to print and get one accordingly.

Keep in mind that overloading of prints will damage the head and underuse of the device will be a loss of capital.

Speed

Not a very essential factor if quality is your priority. Just having a balance between quality and speed would suffice.

You must note that the faster the printing speed, the lighter the printouts would be. If you have to print a big batch of labels in a short time, then you may want a thermal printer like K Comer CX418 that would do the job quickly.

In case, you don’t want the prints to come out light, then you may have to decrease the speed and increase the density from the settings of the printer.

Connectivity

Make sure you get a thermal printer that is compatible with the operating system your computer has. It should be easy to set up especially on your PC.

Models like MUNBYN MU-ITPP941-US would be suitable for Windows while iDPRT SP410 works well with Windows, Mac as well as Linux.

Connecting the printer with a cable is a very convenient option in a sense that there wouldn’t be any sudden network issues.

If you want more convenience and something advanced, opt for wireless models.

Benefits Of Thermal Printer For Amazon FBA

1. Durable

Your Amazon FBA thermal printer would be able to watch the growth of your business career since it lasts longer than an inkjet model. While the former can last for around 4 years, thermal models can be from 7 to 15 years.

2. One Print At A Time

If you use a sheet-form printer and if you don’t have many items to label, there’s a high chance of having more blank space on the sheet. Not only does it create waste but also increases your cost.

However, thermal printers would let you print a single label at a time without having any unnecessary blank space on it. 

3. Quick

Thermal printer tends to do the work super-fast. You can print 50 to 110 labels per minute.

4. No Ink Cartridges

They don’t need any toner or ink tank to use for printing. As long as you have labels in the device, it would print. Not just that, you can make it print around 500,000 shipping or FBA box labels.

Printing Your FBA Labels

Got no clue how to print your FBA labels? Check the steps here.

  • At first, you have to log into Seller Central.
  • From the menu bar, go to Inventory, then Manage FBA.
  • Scan the product list and check the one that you want to print out labels for.
  • Then on the right side of the selected product, click on Edit.
  • From the dropdown menu, select Print Item labels.
  • Add how many labels you would like to print.
  • Click on Paper/Sticker Type.
  • After that, Choose your preference.
  • Lastly, hit the button Print Item labels
  • You would get a PDF of the Labels to print with a thermal printer.
  • You may have to change the scale and paper size setting depending on the label.
  • After that, click on Print.

What Dimensions Does My FNSKU Barcode Need To Be?

FNSKU label should measure from 1×2 inches to 2×3 inches depending on the size of the packaging.

According to Amazon, you must make sure the label has a minimum of 0.25-inch white space on each side and 0.125-inch on top and bottom.

Frequently Asked Questions

1. Does Amazon FBA Use Inkjet Printers?

No, it doesn’t. Printing on Amazon FBA labels with an inkjet printer would result in smearing.

2. Which Is Better Dymo Or Zebra?

Some of the factors make one better than the other.

If you want something budget-friendly, user-friendly, easy-to-setup, consistent alignment, and premium quality, then Dymo products would be suitable for you.

Meanwhile, Zebra range has high-end models but they are ideal for big quantities of labels since they have a higher speed rate. One evident factor is that even at the highest speed, it tends to maintain premium quality.

3. What Size Shipping Labels Should I Buy For Amazon FBA?

As per Amazon, you should get 4×6-inch shipping labels for FBA.

In case you’re looking for one, this set by Freex would be ideal for different thermal printers. You will get 250 labels in the package where each comes with 75GSM thickness to handle the heat of the device. Plus, the adhesive used in labels is strong too.

4. How Do I Print Labels On Amazon Seller Central?

There are many ways through which you can print labels on Amazon Seller Central.

  • One of them would be to log in and go to Inventory and then Manage FBA Inventory from Seller Central.
  • Then scan the products and check the ones you would like to print.
  • Click on the Edit and then select Print Item Labels from the dropdown menu.
  • Type how many labels you would like to print.
  • Add Paper/Sticker Type and then choose your preference.
  • Lastly, click on Print Item Labels. This will download a PDF file for you to print.

5. What Kind Of Labels Does Amazon FBA Use?

Amazon FBA labels should be thermal-printer compatible and size should range from 4×6 inches to 6×8 inches depending on the box size.

Final Words

When it comes to label printing, you must make sure the quality is premium at first. Because, when the prints are legible and the barcodes are scannable, Amazon can easily identify your product and understand where it should be sent to. 

Out of many options, we have found these 5 models that ensure the kind of quality needed for label printing. So, you can consider having one if you want to have the best thermal printer for Amazon FBA.